Paver Supplies
Pavers Warranty for 20 years
Sealers
After your paver installation, the best way to protect this investment is to seal your pavers. Our Florida climate features extreme variations in heat, moisture, and other elements. In order to keep your pavers protected and looking great for years to come, sealing can provide many advantages.
Wet N’ Seal
VOC compliant water borne protective coating for concrete pavers, this sealer is manufactured from a new type of bio-based polymer that is going to revolutionize the paver sealing industry! This new technology enables the pavers to be sealed while still damp! This sealer penetrates the surface and binds the concrete and joint sand. This binding will also help strengthen the substrates. Wet N’ Seal creates a rich and high definition color-boosting appearance NEVER before seen in a water-based sealer, similar to a solvent-based sealer. Manufactured from a durable, non-yellowing and bio-based polymer in a water vehicle and formulated for maximum water-blush (haze) resistance. Satin/semi-gloss appearance, additional applications will increase sheen level. 25% solids by volume, five gallons will cover approximately 1,750 square feet per coat (300 – 350 square feet per gallon).
Solvent Based High Solids Sealer
High gloss clear sealer designed for application to brick pavers, concrete floors, and other cementitious floor type substrates. Its special solvent thinned 100% acrylic resin formulation provides an extremely durable finish that penetrates and seals the surface, while protecting the surface from powdering, oil and grease stains, and it resists moisture penetration. Its high gloss finish enhances the color of substrate, seals, and waterproofs the surface. EXTERIOR USE ONLY. NOT FOR USE ON WET PAVERS. 30% solids by volume, five gallons covers approximately 1,125 square feet per coat (175 – 225 square feet per gallon).
Solvent Based Lower Solids Sealer
High gloss clear sealer designed for application to brick pavers, concrete floors, and other cementitious floor type substrates. Its special solvent thinned 100% acrylic resin formulation provides an extremely durable finish that penetrates and seals the surface, while protecting the surface from powdering, oil and grease stains, and it resists moisture penetration. Its high gloss finish enhances the color of substrate, seals, and waterproofs the surface. EXTERIOR USE ONLY. NOT FOR USE ON WET PAVERS. Dries to the touch within an hour, recoat in two hours. 24% acrylic solids by weight, 20% by volume, and has Xylene and Touluene solvents, five gallons covers approximately 1,500 square feet per coat (125 – 300 square feet per gallon).
Water Based 100% Acrylic Sealer
Formulated to provide superior protection from moisture penetration and the effects of weathering on a variety of properly prepared substrates. It is mildew resistant, nonflammable, resists salts and acids, is safe for use on pre-colored cementitious surfaces, aids in the curing process of masonry substrates, is fast drying and easy to apply. Environmentally friendly, contains a mildew inhibitor. Dries to the touch in one to two hours, recoat in three to four hours. Clean up with warm soapy water. 18% solids by weight and volume, five gallons covers approximately 1,500 square feet per coat (125-300 square feet per gallon).
